The hammer keder is made especially for those cases where a sewing machine is not available and stitching to the textile cloth is not possible. In particular, on very large printed canvases; for example, 20 metres long, 3 metres high, often three sides will be made up with PVC cord and the hammer keder will be used on the fourth, short side. The cloth is tightened, and the hammer keder hammered in. By hitting the PVC cord and the cloth into the profile, the cloth tightens up nicely over the textile frame. The excess cloth is then cut off. The hammer keder is available in two different designs and multiple colours. The interior width of the aluminium profile will determine your choice.

SPECIFICATION

Material: PVC Shore-A 73 or 90

Design: Arrow Narrow and Arrow Wide

Dimensions: 7 x 12.4 mm, 5 x 14.7 mm

Surface: Arrow wide or narrow

Colour: Alu look, transparent blue, white, black

Packaging: Pack onto rolls of 100 metres.

Handling & Storage: Store away from direct sun light, heat, or moisture sources. Temperature of handling the material is at room temperature (20 °C | 68.0 °F). To maintain the technicial properites of the material unaltered it is recommended to keep the product in dry and ventilated storerooms.